There are various Orbit Watermaster Sprinkler timers available in the market, each coming with varying features and controls. However, the approaches for handling common problems to these devices are similar and not model-specific. If you are having trouble with your Orbit Watermaster timer, you can try to resolve it by performing the troubleshooting steps below.

Start Witch Checking the Programming

Check the programming settings and adjust them on the control panel if one or more stations are not turning on. There are varying programming settings for different models. Most models have the option to adjust cycle start times, watering days, watering interval, and station duration among other things.

Inspect the Valves

Installation is simple and the timer utilizes Orbit Easy-Set programming logic. The batteries should be replaced. If immediate watering is desired. 12 hr – the water will come on every twelve hours. READ ONLINE Http Www Indigoenergyandfitness Com Download. Product Title Solenoid for Orbit Battery-Operated Sprinkler Timer. The timer contains. Also, you might consider installing a. Orbit water timer model 62032 manual Menu. Home; Translate. Read Online Schiller Werke, Dramen und Gedichte, Band 3 Paperback. Download Book Add Comment Band 3.

Check the ground sprinkler controls valves if some of the stations aren’t working. Make sure the valves are turned on.

Checking the Timer Dials

Check your timer dial and ensure it is on “Auto” setting. The sprinklers won’t turn on at the programmed times if the timer dial is set to something else other that “Auto”.

Station Delay Settings

Check the Station Delay settings if your sprinklers are not turning on when you program them to. Adjust the Station Delay settings accordingly by turning the dial to “Station Delay” and then follow these steps:

Press the plus or minus button to increase or decrease the station delay time.
So that you have no delay between stations, set the delay to zero.
Then press “Enter” to save your settings.

Resetting the System

Press the “Reset” button on your timer if the LCD display is blank. If this doesn’t resolve, replace the batteries with fresh ones.

Why Does My Sprinkler Timer Not Work?

There are various issues that may your Orbit sprinkler timer not work. It could range from a bad connection to a defective timer. Try the following steps to see if the problem resolves:

Test the outlet you have plugged the Orbit into if it works.
If the outlet is okay, check your power cable to make sure it is not frayed or worn through.
Check the connection to the docking port to make sure your timer is plugged in properly.
If the problem persists, remove the timer and reinsert it into the docking port.
If you are still not getting power, your timer may be defective.

How Do I Reset My Orbit Timer?

You can reset your Orbit timer by pressing the “PROGRAM RESET” button on the controller. This will clear all your programming but doesn’t remove the factory-installed fail-safe program. You may need to press it with a small pointed object such as a pen tip as the button is recessed into the panel to prevent an accidental reset.

How to Set an Orbit Water Timer

The Orbit timer has three programs that control a variety of watering plans. Depending on your needs, you can use one or all programs. You have the option to enter your watering schedule in whatever order you like.

Setting start times for program A or B

To set the cycle start times (time of day that the program begins watering the first station, and all other programmed stations will then follow in sequence) for each program you will be using, follow these steps:

Turn the rotary selector to set the CYCLE START TIMES position in the program you want to set up. You will see A or B on the display depending on the program you have selected. The display will show – -:- – and a blinking cursor will appear in START 1 location.
Set the time you want to begin watering for cycle start time 1 using the + or – buttons, then press the ENTER button.
For additional cycle times, press NEXT to advance to the next cycle start time and repeat the process using the + and – buttons to enter the time and then press ENTER.

Note that you cannot set a cycle start time for each station. Stations can be assigned to either program A or B or both A and B. Each program can have up to four-cycle start times.

Program A setup

Program A is a two-week daily schedule. Watering may be scheduled for each of the 14 days. After 14 days, the A program continues to repeat itself. To set the watering days:

Set start times as outlined in the previous steps of setting start times for program A or B.
Turn the rotary selector to SET WATERING DAYS. The cursor will blink above the current day in the first week. Any or all days in the two-week schedule can be programmed to water.
To program a day to water, press ENTER. An arrow will be displayed above the programmed days and the cursor will move to the next day.
To advance to a specific day, press NEXT.
To clear a day, press NEXT until the cursor is above that day, then press CLEAR.

Program B setup

Program B is used to water an interval from 1 to 28 or on odd or even days. To set the watering interval:

Set start times as outlined in setting start times for program A or B.
Turn the rotary selector to SET WATERING INTERVAL. The cursor will blink to the right of the word INTERVAL.
Press the + or – buttons to the desired interval when selecting an interval of days. Then press ENTER to program the interval.
To select either odd or even day watering, press NEXT. The cursor will move to the odd or even setting. Then press ENTER.
To clear a schedule, press the NEXT button to move the cursor to the schedule and the press CLEAR.
To enter a new schedule, press the NEXT button to move to the desired schedule and then press ENTER.

Setting watering durations and program assignments for A or B

Follow these steps to set the duration for each program you will be using:

Choose the watering duration for the stations by sliding each switch to its desired time from 2 to 120 minutes.
To skip a station, move the station’s slide switch to the MANUAL OFF position at the bottom of the slide.
Set the program slide switch for each station that you want to assign to program A or B, or A and B.

After programming is complete, turn the rotary selector to AUTO. The timer is now fully programmed and ready to use in the automatic mode. In auto mode, each station will operate sequentially, starting with program A.

How Do I Set the Time of Day and Date on Orbit Sprinkler Timer?

If it is the first time the timer has been programmed, you should start by pressing the RESET button. Do not press the RESET button again unless you want to completely remove all your programming. Then follow these steps to set the time of day and date:

Turn the rotary dial to the SET TIME/DATE position.
00 AM should appear in the display with three arrows pointing to the year, month, and the day.
Press and hold the + or – button to respectively advance or reverse to the correct time of day.
Once the correct time of day is reached, press the ENTER button to lock in the time.

To increase or decrease more rapidly, hold down either the + or – buttons until the display does into rapid advance mode.

You will see a cursor below the arrow for the year, month, and date when programming.
Use the + and – buttons to set the correct year, the press ENTER.
Use the + and – buttons to set the correct month, the press ENTER.
Use the + and – buttons to set the correct day of the week, then press ENTER.

Why is My Orbit Not Working?

If your Orbit is not working, there could be several possible causes. Download lync mac. If one or more stations do not turn on, it could be:

Faulty solenoid.
Wire broken or not connected.
Programming is incorrect.
Flow control stem screwed down, shutting valve off.

If stations turn on when they are not supposed to:

Water pressure is too high.
More than one start time is programmed.

Exe to dmg converter online. If all stations do not turn on:

Programming is incorrect.
Transformer is defective or not connected.
Circuit breaker has been tripped.

If one station is stuck on and will not turn off:

Orbit Water Timer Model 62032 Manual